INSTALLAZIONE
1/17
The first insulated anchor For the moulded-case circuit-breakers SACE Tmax XT1, XT2, XT3 and XT4, the gure below gives an example of the maximum recommended distance (in mm) within which the rst insulated anchor shall be positioned according to the highest admissible peak current value of the circuit-breaker The first insulated anchor For the moulded-case circuit-breakers SACE Tmax XT1, XT2, XT3 and XT4, the gure below gives an example of the maximum recommended distance (in mm) within which the rst insulated anchor shall be positioned according to the highest admissible peak current value of the circuit-breaker The first insulated anchor For the Tmax XT molded-case circuit-breakers, the figure below gives an example of the maximum rec- ommended distance (in mm) within which the first insulated anchor should be positioned according to the highest admissible peak current value of the circuit-breaker and according to the cross-sectional area of the cable. The maximum recommended distance is also valid for busbar connections. For further information and details circuit-breaker instruction manuals should be consulted. Posizione del primo ancoraggio Per gli interruttori scatolati Tmax XT, la figura qui sotto mostra un esempio della distanza massima consigliata (in mm) entro la quale andrebbe posizionato il primo ancoraggio in base al più alto valore ammissibile della corrente di picco dell’interruttore e in relazione alla sezione del cavo. La distanza massima consigliata è anche valida per le connessione in sbarra. Per ulteriori informazioni e dettagli si rimanda ai manuali di istruzioni dell’interruttore.
and to the cross-sectional area of the cable. The maximum recommended distance is valid a busbar connections. For further information and reference must be made to the circuit-breaker te catalogues and instruction manuals. and to the cross-sectional area of the cable. The maximum recommended distance is valid also w busbar connections. For further information and det reference must be made to the circuit-breaker techni catalogues and instruction manuals.
SACE Tmax XT1
SACE Tmax XT1 SACE Tmax XT1
SACE Tmax XT2 SACE Tmax XT2
SACE Tmax XT2
16÷70 mm 2 (max 95 mm 2 )
16÷70 mm 2 (max 95 mm 2 ) 2 2
2 )
2 )
16÷70 mm 2
16÷70 mm 2 2 2
2.5÷10 mm 2
2.5÷10 mm 2 2 2
2.5÷10 mm 2
2.5÷10 mm 2 2 2
SACE Tmax XT3 SACE Tmax XT3
SACE Tmax XT4 SACE Tmax XT4
SACE Tmax XT3
SACE Tmax XT4
16÷120 mm 2 (max 185 mm 2 )
16÷120 mm 2 (max 185 mm 2 ) 2 2
16÷120 mm 2 (max 185 mm 2 )
16÷120 mm 2 (max 185 mm 2 ) 2 2
2 )
2 )
2 )
2 )
2.5÷10 mm 2
2.5÷10 mm 2 2 2
(*) Value valid also with rear terminals (*) Value valid also with rear terminals
(*) Value valid also with rear terminals (*) Value valid also with rear terminals
Powered by FlippingBook