Flexible metallic conduit systems

ADAPTAFLEX® FLEXIBLE METALLIC CONDUIT SYSTEMS

— Enhanced fire performance EMI/EMC Screen liquidtight conduit systems Type EMIEF-SPL conduit

Generation, according to ASTM E 162, ASTM E 662 and Bombardier SMP 800-C testing procedures, covering fire safety requirements worldwide. Plus, thanks to its internal braiding, it is the outstanding solution where low smoke and toxicity are of concern and EMI/EMC screening is required. Advantages include: • EN45545-2 and BS EN 61386-1 & 23 accreditation • HL3 - R22 & R23 rating • Up to IP69 rating • High flexibility • Oil and hydrocarbons resistant • Suitable for any buildings & infrastructure where low smoke, low toxicity and EMI screening is required, wide use underground and in any part of train vehicles and infrastructure • EMI/EMC screening

The EMIEF-SPL conduit systems are Enhanced Fire Performance rated, highly flexible, liquidtight with a wide temperature operating range. Designed to meet the demand for ‘interoperability’ and compliance with stringent local and European fire safety requirements in the rail infrastructure market, the EMIEF-SPL system, is accredited with the EN45545-2 standard achieving the highest HL3 fire performance rating for both interior and exterior locations. The system provides higher performance levels of flexibility, impact and abrasion resistance, combined with enhanced chemical resistances especially to oils and greases, with a much higher and lower temperature rating (-40°C to +105°C), than any other metallic conduit system with a EN45545-2 HL3 rating. Providing outstanding performance for Surface Flammability, Smoke Generation Rate and Toxic Gas

ADAPTAFLEX® FLEXIBLE METALLIC CONDUIT SYSTEMS

— Liquidtight flexible metallic conduit systems Type EMIEF'- SPL conduit

Enhanced fire performance, under-braided, covered steel flexible conduit /Materials: Galvanised steel core, string packing up to 32mm, interlocked core 40mm and above with galvanised steel overbraid; Low fire hazard jacket The NEW EMIEF- SPL conduit systems are Enhanced Fire Performance rated, highly flexible, liquidtight with a wide temperature operating range. Designed to meet the demand for ‘interoperability’ and compliance with stringent local and European fire safety requirements in the rail infrastructure market, the EMIEF- SPL system, is accredited with the EN45545-2 standard achieving the highest HL3 fire performance rating for both interior and exterior locations. The system provides higher performance levels of flexibility, impact and abrasion resistance, combined with enhanced chemical resistances especially to oils and greases, with a much higher and lower temperature rating (-40°C to +105°C), than any other metallic conduit system with a EN45545-2 HL3 rating. Providing outstanding performance for Surface Flammability, Smoke Generation Rate and Toxic Gas Generation, according to ASTM E 162, ASTM E 662 and Bombardier SMP 800-C testing procedures, covering fire safety requirements worldwide. Plus, thanks to its internal braiding, it is the outstanding solution where low smoke and toxicity are of concern and EMI/EMC screening is required.

— Type EMIEF-SPL

Part no. Advantages include: • EN45545-2 and BS EN 61386-1 & 23 accreditation • HL3 - R22 & R23 rating • Up to IP69 rating • High flexibility • Oil and hydrocarbons resistant • Suitable for Any buildings & infrastructure where low smoke, low toxicity and EMI screening is required, wide use underground and in any part of train vehicles and infrastructure • EMI/EMC screenin g Nominal conduit size (mm) Outside diameter (mm) US conduit size (in) Outside diameter (mm)

Inside diameter (mm)

Coil length (m)

EMIEF-SPL16/25M EMIEF-SPL20/25M EMIEF-SPL25/25M EMIEF-SPL32/25M EMIEF-SPL40/10M EMIEF-SPL50/10M EMIEF-SPL63/10M

16 20 25 32 40 50 63

12 16 21 27 35 41 53

3/8 ½ ¾

17.9 21.3 26.5 33.2 42.0 48.0 60.5

12.3 15.8 20.8 26.5 35.0 40.0 51.3

100 120 140 180 230 260 330

1 1/4 1 1/2

Conduit size US / CAN in mm

Dimensions (mm)

IEC/EN (mm)

Outside Dia. (A)

Inside Dia. (B)

Bend radi (C)

Part No.

Part number example: To order quote part number, colour & conduit coil length, e.g. EMIEF-SPL16/BL/25m. EMIEF-SPL16 16 3/8" 12 17.9 12.3

100 120 140 180

EMIEF-SPL20 EMIEF-SPL25 EMIEF-SPL32 EMIEF-SPL40 EMIEF-SPL50 EMIEF-SPL63

20 25 32

1/2" 3/4"

16 21 27 35 41 53

21.3 26.5 33.2 42.0 48.0

15.8 20.8 26.5

Approvals

IP rating

Appropriate fitting 40

Temperature range UV resistance 35.0 230

1 1/4" 1 1/2"

50 63

40.0

260 330

For use with: Type SPL, SSPL

Static applications: -40oC to +105o C Moving applications: -30oC to +105o C 60.5 51.3

Very high

IP66 IP67 IP68 IP69

Type M, C45 & C90

Part number example: To order quote part number, colour & conduit coil length, e.g. EMIEF-SPL16/BL/25m.

Flexibility & fatigue life

Type A, B, M, C45 & C90

Type M, C45 & C90 (10 bar 30mins) IP rating

Very high flexibility – High fatigue life Temperature range UV resistance

Approvals

Appropriate fitting

EN45545-2 HL3 - R22 & R23 ASTM E 162 ASTM E 662 Bombardier SMP 800-C

For use with: Type SPL, SSPL

Fire performance & EMI screen Self extinguishing Halogen free Static applications: -40oC to +105o C Moving applications: -30oC to +105o C Flexibility & fatigue life Very high flexibility – High fatigue life

Very high

Type M, C45 & C90

IP66 IP67 IP68 IP69

Type M, C45 & C90

Type A, B, M, C45 & C90

NFPA130

Type M, C45 & C90 (10 bar 30mins)

EN45545-2 HL3 - R22 & R23 ASTM E 162 ASTM E 662 Bombardier SMP 800-C

Fire performance & EMI screen Self extinguishing Halogen free

Type M, C45 & C90

— The graph shows the results of EMIEF-SPL screened conduit, with its appropriate fittings. — The conduit is tested by ERA technology, to IEC 1196-1 Transfer Impedance. — Tests measured attenuation in decibels (dB) over the frequency range covered by the EMC directive, 100 kHz to 1 GHz. — Transfer Impedance was extrapolated to per metre transfer impedance and converted to give a shielding effectiveness, demonstrated by the graph.

— The graph shows the results of EMIEF-SPL screened conduit, with its appropriate fittings. — The conduit is tested by ERA technology, to IEC 1196-1 Transfer Impedance. — Tests measured attenuation in decibels (dB) over the frequency range Transfer Impedance was extrapolated to per metre transfer impedance and converted to give a shielding effectiveness, demonstrated by the graph. covered by the EMC directive, 100 kHz to 1 GHz. —

110

100

0.1

100

1000

Frequency (Mhz)