ADAPTAFLEX® FLEXIBLE METALLIC CONDUIT SYSTEMS
6
— Flexible metallic conduit systems Introduction
Adaptaflex have a wide selection of metallic conduit systems manufactured either in galvanized or stainless steel.
— 01
A wide range of different types of conduit systems, offered in nominal conduit size from 3mm for CCTV/roller shutter doors and for protecting fiber optics cables, right up to 75mm for larger cable carrying capacity. Larger sizes are available on demand. 1. Liquidtight flexible metallic conduit systems Covered by a liquidtight thermoplastic coating, with associated couplings, connectors and fittings for the installation of electric conductors. The right solution for especially demanding environments in terms of Ingress Protection rating. ABB Adaptaflex can boast the highest IP rated LFMC Systems in the market: IP66, IP67, IP68 (10 bar, 30 min), IP69. 2. Liquid-resistant flexible metallic conduit systems Galvanised steel core, square-locked with thin wall convoluted thermoplastic cover. The solution for liquid resistant specifications. ABB Adaptaflex Liquid-resistant FMC Systems can assure Ingress Protection between IP54 and IP65. 3. Superflexible metallic conduit systems Made by the helical coiling of a self-interlocked ribbed strip of galvanized steel or stainless steel, they're used primarily in dry areas where metallic strength to protect conductors is required; they can freely and highly flex, not maintaining any permanent bend. 4. Overbraided flexible metallic conduits systems Stainless steel and galvanized steel overbraid give enhanced protection against abrasion, as well as offering additional mechanical protection against impact and compression. Suitable for applications calling for enhanced low fire hazard properties. High specification tinned copper over-braided solution are available for greater EMI screening protection levels.
— 02
— 03
— 04
Powered by FlippingBook