Flexible metallic conduit systems

CUTTING TOOLS - CUT-VICE & ROTOCUT

— Tools Cut-vice & Rotocut

— Cut-vice

— Rotocut

Cut-vice cutting tool

Rotocut cutting tool

Part no. CUT-VICE

Part no. ROTOCUT

Cut-vice Cut-vice offers the ability to produce a clean cut for conduit sizes 16mm to 40mm. Instructions Place the conduit along the vice body and tighten the clamp. Holding the conduit and integral handle together, insert a hacksaw blade into the guide and cut. For braided conduit, wrap adhesive tape around the cutting point to secure braid. Remove tape after cutting.

Rotocut Rotocut offers a simple but effective method for cutting 20mm and 25mm S, SS, SP, LFH-SP and SN steel conduit types. Instructions Adjust the clamping pin so that the conduit is just held in the recess. Squeeze the lever and body whilst rotating the cutting blade. When the blade appears on the inside of the conduit, release the pressure and remove the conduit. A simple twist will then separate the two parts. Where the conduit is covered, the covering can be cut prior to separation. Spare blades are available.