SACE TMAX XT UL/CSA LOW VOLTAGE MOLDED CASE C I RCUI T- BRE AKERS UL4 89 AND CSA C2 2 . 2 STANDARDS
4/26
— Accessories for Ekip Touch/Hi-Touch trip units
Homopolar toroid for the earthing conductor of the main power supply The Ekip Touch/Hi-Touch trip units can be used with an external toroid positioned, for example, on the conduc- tor that connects the star center of the MV/LV transformer to earth (homopolar transformer): in this case, the earth protection is called Source Ground Return. Four sizes of the toroid are available: 100A, 250A, 400A, 800A. The homopolar toroid is an alternative to the toroid for differential protection. This is for the XT7 and XT7 M only. Toroid for differential protection Connected to the Ekip Touch/Hi-Touch trip units equipped with a rating plug for differential protection, this toroid enables earth fault currents of 3…30A to be monitored. This is an alternative to the homopolar toroid and should be installed on the busbar system. This is for the XT7 and XT7 M only.
— Homopolar toroid for the earthing conductor of the main power supply
Display and supervision Ekip Multimeter Display for the front of the switchgear
— Toroid for differential protection
The EkipMultimeter is a display unit which can be installed on the front of the switchgear for the Tmax XT circuit- breakers equippedwithEkipTouch/Hi-Touch tripunits. Thedevice is equippedwitha large touch screendisplay and enablesmeasurements tobedisplayed. If connectedtotripunitswithadisplay, theEkipMultimeter enables theadjust- mentofparametersandprotectionthresholds.Upto4EkipMultimeterdevicescanbeconnectedat thesametimetothe same Ekip protection trip unit to display currents, voltage, power and energy. The Ekip Multimeter can be connected to a single trip unit and can be powered either by direct current (24-48V DC or 110-240V DC) or al - ternating current (110-240V AC). It is equipped with a 24V DC output that supplies the trip unit to which it is con - nected (only if Ekip Supply is not used). Moreover, in case of XT2-XT4 sizes only, this device can be used also with the Dip version of Ekip LSI and Ekip LSIG trip units.
— An Ekip Multimeter Dis- play for the front of the switchgear.
Power supply
24-48V DC, 110-240V AC/DC 21.5-53V DC, 105-265V AC/DC
Tolerance
Rated Power Inrush current
10VA/W
2A for 20ms
Lite Panel The Lite Panel is a 7 inches local control panel that canmonitor and control max 15 devices connected viaModbus TCP/IP or Modbus RTU. Availablewith Ekip Touch/Hi-Touch trip units. Themost important functionalities of this device: • User administration: 5 level of user inside the Lite Panel • Automatic scan via Modbus RTU and via Modbus TCP connection of various devices already mapped in- side the Lite Panel: Emax 2, Tmax XT, ITS2, M4M, CMS700 etc...(see detailed list in the user installation manual) • Local monitoring directly on the front of the panel for all devices • Local control of devices: open, closing, reset Alarm list and event log directly displayed from one access point
— Lite panel
Powered by FlippingBook