SACE TMAX XT UL/CSA LOW VOLTAGE MOLDED CASE C I RCUI T- BRE AKERS UL4 89 AND CSA C2 2 . 2 STANDARDS
4/30
— Accessories for XT2-XT4 Ekip trip units
HMI030 interface on the front of the switchboard The HMI030 is an interface on the front of the switchboard which is only usable with protection trip units fitted with the Ekip Com. Main features: • Installation : The HMI030 can be fitted into the hole in the door using an automatic click-in method. In sit- uations where mechanical stress is particularly intense, it can also be installed by using the special clips supplied. It must be connected directly to the Ekip LSI and Ekip LSIG protection trip units with Ekip Com via the serial communication line. The HMI030 requires a 24V DC power supply. • Functions : The HMI030 consists of a graphic display and four buttons for browsing through the menus. This accessory allows you to view: - the measurements taken by the trip unit to which it is connected; - the alarms/events of the trip unit. Thanks to its high level of accuracy, the device is a valid substitute for conventional instruments without any additional current transformer. • Communication : The HMI030 is provided with two communication lines, to be used alternatively with: - Modbus - Local Bus Connecting the Ekip LSI and Ekip LSIG to the Local Bus allows the Modbus line of the Ekip Com module to connect to a different communication network.
— HMI030 interface on the front of the switchboard
Powered by FlippingBook