Tmax XT UL Catalogo [EN]

SACE TMAX XT UL/CSA LOW VOLTAGE MOLDED CASE C I RCUI T- BRE AKERS UL4 89 AND CSA C2 2 . 2 STANDARDS

7/22

— Signaling

AUX 250V AC/DC - Electrical specifications Power supply voltage

Operating current according to the utilization category AC-15 AC-14 AC-13 DC-14

DC-13

DC-12

4 A 5 A

5 A 6 A

6 A 6 A

- -

250V AC 125V AC 250V DC 110V DC

- -

0.03 A 0.05 A

0.3 A 0.5 A

AUX 24V DC - Electrical specifications

Power supply voltage

Operating current

5 V DC

0.001 A

30 V DC

0.1 A

400V AC auxiliary contacts 400V AC auxiliary contacts are available only for the XT2, XT4 and XT5 circuit-breakers in the following versions: • cabled (AWG17 cable section -1mm 2 ): - for fixed/plug-in circuit-breakers with 3.28ft long cables; - for withdrawable circuit-breakers with a fixed part and moving part connector. With the XT2 and XT4, the 400V auxiliary contacts take up the whole right-hand slot of the circuit-breaker. For the XT5 1Q+1SY, the 400V auxiliary contacts are available only with thermal-magnetic or Ekip Dip trip units.

— Cabled auxiliary contact

Combinations

XT2

XT4

XT5

3/4p

1Q 1SY 400V

F-P-W F-P-W

F-P-W (1)

2Q 400V

F-P-W

F = Fixed, P = Plug-in, W = Withdrawable (1) Only for circuit-breakers with thermal-magnetic or Ekip Dip trip units.