SACE TMAX XT UL/CSA LOW VOLTAGE MOLDED CASE C I RCUI T- BRE AKERS UL4 89 AND CSA C2 2 . 2 STANDARDS
7/54
— Safety and protection
Protection device for opening and closing pushbuttons - PBC This accessory is applied to the safety cover of the XT7 M and is available in two versions. The push-button protection device blocks the operations on both the opening and closing push-buttons un- less a special key is used. The padlockable push-button protection device makes it possible to block either or both push-buttons and to lock the covers in place. It does not trip the breaker as a standard "Padlock device" would. The pro- tection device for opening and closing push-buttons is an alternative to PLC padlocks. Mechanical operation counter - MOC The mechanical operation counter is available on the Tmax XT7 M only. This mechanical operation counter is visible on the front of the circuit-breaker and allows the user to see how many mechanical operations the device has performed. Flange This is a plastic plate that acts as an interface between the circuit-breaker and the hole in the panel door. All the Tmax XT flanges are newly designed and do not require screws for installation. The flanges can be applied: • around the front part of the fixed/plug-in circuit-breaker; • around the operating lever for all fixed/plug-in/withdrawable version circuit-breakers; • around the MOD or MOE motor operator; • around the front of FLD locks; • around the direct rotary handle operating mechanism; • around the RC Inst, RC Sel for the XT1 and XT3, and around the RC Sel for the XT2, XT4 and XT5.
— Protection device for opening and closing pushbuttons - PBC
— Mechanical opera - tion counter - MOC
— Circuit-breaker with optional flange
— Rotary handle with flange
— MOE with flange
— MOD with flange
— XT2-XT4 circuit-breaker with standard flange
— XT7 and XT7 M flanges
— XT1-XT3 circuit-breaker with standard flange
Powered by FlippingBook