ACCESSOR I ES
6/21
Power supply Ekip Supply module (Fig. 23)
The Ekip Supply module supplies all Ekip trip units and modules present on the terminal box and of the circuit-breaker with several auxiliary power (in AC or DC) available in the switchgear. The module is mounted in the terminal box and permits the installation of the other advanced modules. It can be field installed at any time. Two versions are available according to the control voltage available: • Ekip Supply 110-240V AC/DC • Ekip Supply 24-48V DC
Supply
Ekip Supply
Ekip Dip
Nominal voltage Voltage range
24-48V DC
110-240V AC/DC 105-265V AC/DC
— Fig. 23
21,5-53V DC
Rated power (including modules)
10W max.
10W max.
Inrush current Nominal voltage Voltage range
~2A for 20ms
~2A for 20ms
Ekip Touch/ Hi-Touch
24-48V DC
110-240V AC/DC 105-265V AC/DC
21,5-53V DC
Rated power (including modules)
10W max.
10W max.
Inrush current
~2A for 20ms
~2A for 20ms
Connectivity Ekip Com modules (Fig. 24)
The Ekip communication modules enable SACE Emax 2 circuit-breakers to be integrated in an industrial communication network for remote supervision and control of the circuit-breaker. They are suitable for all distribution and generator protection versions of the Ekip Touch and Hi-Touch trip units. Since they are mounted in the terminal box, communication can be maintained with withdrawable circuit-breakers, even while in the racked-out position. Several Ekip Com modules can be installed at the same time, thereby enabling connection to communication systems that use different protocols. The Ekip Com modules for Modbus RTU, Profibus-DP and DeviceNet™ contain a terminating resistor and dip switch for optional activation to terminate the serial network or bus. The Profibus-DP module also contains a polarization resistor and dip switch for its activation. The Ekip Com modules are supplied with auxiliary position contacts Ekip AUP and ready to close circuit-breaker contacts Ekip RTC. For industrial applications in which a higher reliability of the communication network is required, the Ekip Com Redundant modules can be installed together with the corresponding Ekip Com modules in order to provide a back-up connection to the network.
— Fig. 24
The following communication protocols are available for Ekip trip units:
Protocol
Ekip Com Module
Ekip Com Redundant Module Ekip Com R Modbus RS-485
Modbus RTU Modbus TCP Profibus-DP
Ekip Com Modbus RS-485 Ekip Com Modbus TCP
Ekip com R Modbus TCP Ekip Com R Profibus
Ekip Com Profibus Ekip Com Profinet
Profinet
Ekip Com R Profinet
EtherNet/IP™ DeviceNet™
Ekip Com EtherNet/IP™ Ekip Com DeviceNet™
Ekip Com R EtherNet/IP™ Ekip Com R DeviceNet™
IEC61850
Ekip Com IEC61850
Ekip Com R IEC61850
Cloud connectivity
Ekip Com Hub
–
— Electrical diagram reference: figures from 51 to 57. Redundant version from 61 to 66.
Powered by FlippingBook