ACCESSOR I ES
6/23
Signalling Ekip 2K Signalling modules (Fig. 29)
The Ekip 2K Signalling modules supply two input and two output contacts for control and remote signalling of alarms and circuit-breaker trips. They can be programmed from the trip unit’s display or through the Ekip Connect software. When using Ekip Connect, combinations of events can be freely configured. They are suitable for all distribution and generator protection versions of the Ekip Touch and Hi-Touch trip units. Three versions of the Ekip 2K Signalling modules are available: Ekip 2K-1, Ekip 2K-2, RELT Ekip 2K-3. A maximum of three modules for E2.2, E4.2, E6.2, and two for E1.2 can be installed at the same time. The RELT Ekip Signalling 2K-3 module enables the wizard for easy configuration of the arc flash mitigating 2I protection. This automatically assigns the I/O for remote activation and positive feedback.
— Electrical diagram reference: figures 41, 42, 43
— Fig. 29
Ekip 3T Signalling modules (Fig. 29A) The Ekip 3T Signalling modules provide three analog inputs for PT100/PT1000 thermo-resistances and one analog input 4-20mA for external sensors. Through the Ekip Connect commissioning tool, it is possible to set different control thresholds and associate them to digital signals. The Ekip 3T Signalling modules are suitable for all the versions of Ekip Touch and Hi-Touch trip units. However, PT100 sensors are compatible with the Ekip black platform only. Up to two modules can be installed simultaneously on SACE Emax 2: one Ekip Signalling 3T-1 and one Ekip Signalling 3T-2. ABB external probes PT1000 are available for busbar applications. Ekip 4K Signalling module (Fig.30) The Ekip 4K Signalling module is available for E2.2, E4.2, E6.2. This module provides four input contacts and four output contacts for control and remote signalling. It can be programmed from the trip unit’s display or through the Ekip Connect software. When using Ekip Connect, combinations of events can be freely configured. It is installed in the housing provided in the front left of distribution and generator protection versions of the Ekip Touch and Hi-Touch trip units, without having to remove the trip unit itself and is an alternative to the AUX 6Q auxiliary contacts unit.
— Fig. 29 A
— Electrical diagram reference: figure 2
— Fig. 30
Ekip 10K Signalling modules (Fig. 31) Ekip 10K Signalling is an external signalling unit designed for DIN rail installation for SACE Emax 2 automatic circuit-breakers. The unit provides ten contacts for electrical signalling of timing and tripping of protection devices. If connected via the Ekip Connect software, the contacts can be freely configured in association with any event and alarm or combination of both. Several Ekip 10K Signalling modules (up to 3) can be installed at the same time on the same Ekip trip unit. The Ekip 10K Signalling module can be powered either by direct or alternating current and can be connected to all the trip units via internal bus or Ekip Link modules.
— Electrical diagram reference: figure 103
— Fig. 31
Powered by FlippingBook