SACE EMAX 2 NEW LOW VOLTAGE POWER C I RCUI T BRE AKERS TO ANS I C37 / UL 1066 / CSA STANDARDS
3/18
— Overview
Test function All SACE Emax 2 trip units are equipped with a test port on the front that can be used to carry out cir- cuit breaker tests by connecting one of the follow- ing devices: • Ekip TT to perform trip tests, LED tests and checks for the absence of alarms detected by the watchdog function • Ekip T&P not only for the trip and LED tests, but also for testing the individual protection func- tions and the saving of the relative report In addition, the iTest key can run a battery test when the circuit breaker is disconnected. User interface Ekip trip units can clearly identify the status of the circuit breaker through LEDs activation or an intui- tive graphical interface. A password system is used to manage “Read” or “Edit” modes. The default password (00001) can be directly input by the user. The protection parameters are settable in “Edit” mode, while the information can always be ac- cessed in “Read” mode. Data & Measurements SACE Emax 2 trip units are no longer simply protec- tion devices. The Ekip Dip trip unit measures phase and neutral current with greater accuracy, while the other advanced units integrate multimeter and net- work analyzer functionalities. Compliant with IEC 61557-12 (Class 1 in energy accuracy). A complete information on the circuit breaker and its operation is available for effective fault analysis and preventive scheduling of maintenance.
Ekip Touch and Hi-Touch trip units can be easily in- tegrated into the most modern supervision sys- tems through several communication protocols: • IEC 61850 • Modbus TCP • Modbus RS-485
• Profibus • Profinet • DeviceNet™ • EtherNet/IP™
Measurements, statuses and alarms can be easily programmed and viewed by remote function, with no need of external interface devices. Moreover, the Ekip Com Actuator module can be installed in the front of the device to remotely control the circuit breaker. Several communication modules with dif- ferent protocols can be used simultaneously. In ad- dition, up to two modules using the same protocol can be installed to help ensure a higher reliability of the installation. The Ekip Com Hub module allows cloud connectivity to ABB Ability™ Energy and As- set Manager platform. The new embedded Blue- tooth Low Energy technology makes the circuit breaker easier to access, reducing time to commis- sioning and set parameter. Ekip Dip and Ekip LCD trip units are not provided with this feature.
Communication & Connectivity
Powered by FlippingBook