SACE EMAX 2 NEW LOW VOLTAGE POWER C I RCUI T BRE AKERS TO ANS I C37 / UL 1066 / CSA STANDARDS
5/6
— Supervision and control Electrical switchgear
— Ekip Link is a flexible and efficient solution for controlling and supervising low-voltage electrical switchgear. SACE Emax 2 circuitbreakers can be connected to the Ekip Control Panel operator panel by means of Ekip Link interface modules. Ekip Link system The main characteristics of the Ekip Link System are: • centralized control; from the Ekip Control Panel operator panel, all the main values of the installa- tion (electrical measurements, system diagnos- tics, trends…) can be monitored and controlled. • adaptation to real requirements ; when the elec- trical values to be monitored are limited to cur- rents only, the Ekip Dip trip unit can be connected to the Ekip Link without having to use circuit breakers equipped with communication modules.
• access via the Internet with any Internet browser using the web server function performed by the Ekip Control Panel. • rapid installation , through the use of standard- ized EtherNet™ components such as STP cables and RJ45 type connectors. • ease of use ; due to the Ekip Control Panel opera- tor panel in front of the switchgear with colour touch screen, the system mimic panel can be dis- played so that the entire installation can be con- trolled rapidly and intuitively. • ready to use ; Ekip Control Panel is supplied with pre-configured software that requires no pro- gramming. It is only necessary to start scanning the Ekip Link system from the operator panel and in a few seconds communication with the con- nected devices is active. Ekip Link enables supervision of electrical switch- gear on which up to 30 ABB SACE circuit breakers have been installed. Tmax T and Tmax XT series cir- cuit breakers equipped with Modbus RTU commu- nication can also be easily integrated into the Ekip Link system using the multi-serial port fitted on the Ekip Control Panel.
Powered by FlippingBook