SACE EMAX 2 NEW LOW VOLTAGE POWER C I RCUI T BRE AKERS TO ANS I C37 / UL 1066 / CSA STANDARDS
6/28
— Accessories for Ekip trip units
Displaying and supervision Ekip Multimeter (Fig. 43)
Ekip Multimeter is a display unit to be installed on the front of the switchgear for SACE Emax 2 cir - cuit-breakers equipped with Ekip electronic trip units. The device is equipped with a large touch screen display and enables measurements to be displayed with the same levels of precision. If connected to trip units with a display, Ekip Multimeter enables the adjustment of parameters and protection thresholds. Up to 4 Ekip Multimeter devices can be connected at the same time to the same Ekip protection trip unit to display currents, voltage, powers and energy. Ekip Multimeter can be powered either in direct current or in alternating current. It is equipped with a 24V DC output that supplies the trip unit to which it is connected. Power supply 24-48V DC, 110-240V AC/DC Tolerance 21.5-53V DC, 105-265V AC/DC Rated Power 10VA/W Inrush current 2A for 20ms Ekip Control Panel on front of switchgear (Fig. 44) The Ekip Control Panel enables the SACE Emax 2 circuit-breakers connected to the Ekip Link system to be controlled and monitored. The panel is supplied already equipped with supervision software and requires no programming. Ekip Control Panel requires a 24V DC power supply and is equipped with: • 2 RJ45 EtherNet ports for connection to the Ekip Link system and to the local network for remote con - trol via web server option • 1 RS485 serial port for integration of the Modbus network if it is to be used with circuitbreakers of the Tmax series • 4 USB ports for downloading data.
— Fig. 43
— Fig. 44
Powered by FlippingBook