ACCESSOR I ES
6/29
Testing and programming Ekip TT testing and power supply unit (Fig. 45)
Ekip TT eliminates the need for the Ekip trip unit to have anauxiliary power supply. In this way, the last pro- tection device tripped can be displayed directly on the screen or by the illumination of corresponding LEDs. Moreover, the unit permits verification that the circuit-breaker trip mechanism is operating correctly (trip test). Ekip TT can be directly connected through the front test connector of any Ekip trip units of SACE Emax 2 and allows to set all protection functions. Ekip T&P testing kit (Fig. 46) Ekip T&P is a kit that includes different components for programming and testing the electronic protection trip units. The kit includes: • Ekip T&P unit; • Ekip TT unit; • adaptors for Emax and Tmax trip units; • USB cable to connect the T&P unit to the Ekip trip units; • installation CD for Ekip Connect and Ekip T&P interface software. The Ekip T&P unit easily connects from your PC (via USB) to the trip unit (via mini USB) via the cable pro - vided. The Ekip T&P unit can perform simple manual or automatic tests on the trip unit functions. The Ekip T&P will also provide the ability to conduct more advanced function testing that allows the addition of harmon- ics and the shifting of phases to more accurately represent the real conditions of an application. Thus, leading to more concise protection function parameters that may be required for critical applications. It can also generate a test report as well as monitor maintenance schedules. Ekip Programming Module (Fig. 47) The Ekip Programming module is used for programming Ekip trip units via USB to a PC using the Ekip Con- nect software that can be downloaded on-line. This can be useful for uploading/downloading entire sets of parameters for multiple breakers both for set-up as well as for maintenance (for periodic cataloging breaker parameters in case of a catastrophic situation).
— Fig. 45
— Fig. 46
— Fig. 47
Powered by FlippingBook